• Cartridge Size: 10.3 oz size
• Begins to Harden: 18 to 24 hr.
• Full Cure: 7-28 days
• Specific Gravity: 0.92
• For Use On: Plastic, Fiberglass, Metal, Glass, Cement, Painted Materials, PVC, Vinyl, Brick, Wood
Flat $7 shipping
This product can only be shipped by Ground transportation. See more details below.
This product is also not available for shipment internationally, to Alaska, or to Hawaii.
Surebond SB-190 Everseal Adhesive Sealant in clear is a recommended accessory for all metal roof system applications. When applied to the snow guard’s base and entire perimeter (4 sides), it creates a bond and watertight seal with the metal roof system, ensuring proper installation.
Not recommended for use with soft expansion joints, polystyrene or styrene containing plastic.
Interface and surfaces must be clean, dry and free of dust, dirt, oil and water-proofing and release agents.
Cut cartridge nozzle at slant to 1/4” hole and puncture inner seal, apply bead size as desired. Apply uniform
bead with steady pressure. Tool immediately after application to ensure full contact with both sides of the
joint area. Sealant starts to skin over in 20-25 minutes. Minimum application temperature of 50°F.
Material Safety Data Sheet Click here (.pdf opens in new tab)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Shipping Services- This product can only be shipped via Ground services. UPS Next Day Air, UPS 2nd Day Air, and USPS Priority Mail are unavailable for this product. This product is also unavailable for shipments internationally as well as Alaska or Hawaii.
|Dimensions||12 × 2 × 2 in|
It was very easy to install the snowshoes using the proper glue. We just glued them in place of other ones. It went bad. I will order these again
Ordering process was extremely simple. Product arrived as described and in good condition. Will definitely order from them again!