Clear Polycarbonate Snow Guards
Mount with Metal Roofing Fasteners or SB-190 Sealant.
Can also be purchased with 3M VBM Tape pre-applied for faster installation and less SB-190 needed for the guards.
1 Tube of SB-190 is needed for every 8 Sno Gem Original without 3M tape snow guards. SB-190 adhesive can be found here.
Developed by architectural sheet metal professionals, the Original Polycarbonate™ offers 25 square inches of bonding surface - the larger the base, the greater the holding power. The Original Polycarbonate has the largest base available in the industry! Manufactured from clear UV-stabilized polycarbonate material, or
in a color that is injected throughout the product and matched to any standard roof panel. Diagonal installation creates a 7” barrier for more coverage per unit on wider panels. Apply using tube adhesive, or a mechanical fastening application.
Manufactured from UV-stabilized polycarbonate, the unique design of these crystal-like guards suspends the field of snow until the snow and ice gradually melt under the sun’s rays.
CUT: Sno Gem® snow guard’s prismatic design was developed by architectural sheet metal professionals with over 100 combined years of on-the-roof experience.
CLARITY: Sno Gem® offers a clear prismatic snow guard which retains its crisp, clean and architectural appeal. There’s no metal to rust or stain. Sno Gem® snow guards are unaffected by climate extremes.
CARAT: The true measure of a gem’s worth. At the heart of each Sno Gem® is an engineered, multi-directional, multipurpose drain opening for melting snow and ice to flow freely, plus heat cables can be easily routed through the opening.
Product Sell Sheet (.pdf)
1 Tube of SureBond SB-190 is needed for every 8 Sno Gem Originals without 3M Tape. Click here to view the product.
Additional information can be found on the manufactures website. View here.
|Dimensions||5 × 5 × 5 in|