Refine Results
Category
Price range: $14.00 through $17.00 USD
Price range: $47.00 through $67.73 USD
PVC roofing screws are used for plastic roof panels and trim work, as well as around compatible roofing details and siding connections. They also come up around rooftop accessories and roof edge conditions where the fastener has to match the material underneath it. A small mismatch can cause a loose panel or a leak around the washer. On plastic sheets, the wrong screw can also crack the panel around the hole.
Supply Maverick carries hard-to-find roofing fasteners for contractors and DIYers who know how frustrating it is to stop a job because of a missing screw. Some projects need plastic roofing screws with sealing washers, some call for a low-profile pancake head screw, and others need a self-drilling fastener for steel-to-steel roofing work near a PVC detail. If the application is unclear, check the product page before ordering or contact us with the roof material and the substrate.
Use this category to compare PVC roofing screws, PVC roofing fasteners, plastic roofing screws, related roof fasteners, and metal roofing screws for panel work or trim. The right choice depends first on the roof product; after that, consider the substrate, washer style, head style, point, coating, and screw length.
Most orders placed before 12 noon EST ship the same day. For larger jobs, eligible products may include bulk pricing directly on the product page. Qualified buyers can also apply online for Net 30 purchasing.
The phrase "PVC roofing" is used in more than one way. It may refer to corrugated plastic panels, but it may also describe polycarbonate panels, single-ply membrane roofing, metal roofing work around PVC components, or related roof details. Each setup uses a different fastener approach.
| Roof product | Common fastener need | Check before ordering |
| Corrugated PVC panels | Sealing washer, exterior coating, room for panel movement, and compatible point style | Confirm the hole size, washer compression, panel profile, and installation location. |
| Polycarbonate roof panels | A fastener made for thermoplastic sheet movement, often paired with a larger sealing washer | Leave enough movement at the fastener so the sheet doesn’t crack around the hole. |
| PVC single-ply membrane | Approved roof fasteners, plates, or discs, fastening patterns, and deck-specific attachment | Confirm the roof system requirements before ordering screws for a membrane assembly. |
| Metal roofing near PVC details | A pancake head screw, washered fastener, self-drilling screw, or another fastener based on clearance and substrate | Check whether the connection is steel-to-steel, trim-to-framing, clip-to-structure, or panel-to-accessory. |
That last point is especially relevant on real job sites. A screw that works for a standing seam clip should stay in that lane unless the roof system says otherwise. Commercial membrane roofs are usually tied to a tested assembly, so the deck, plate, screw type, spacing, and membrane details need to line up with the project requirements.
Start with the material under the screw. Steel framing calls for a different point than wood framing, a plastic panel has different movement needs than a metal panel, and a membrane roof may need a plate or a disc, with a pattern that may already be set by the roof system.
| Selection point | What to look for |
| Substrate | Identify the wood, steel, purlin, insulation board, roof deck, and other base material before choosing the point style. |
| Roof material | Corrugated PVC, polycarbonate, vinyl-style panels, PVC membrane, metal roof components, and roof accessories each have their own fastening needs. |
| Washer or plate | Exposed roof fasteners often use ethylene propylene diene monomer (EPDM) washers. Commercial membrane systems may use plates or discs to spread the load. |
| Screw point | Match the point to the panel and the base material so the screw drills cleanly. Poor point selection can damage the panel or strip the connection. |
| Head style | Pancake heads sit low for clip work and tight clearances. Hex washer heads are common on exposed roofing and siding fasteners. |
| Coating | Zinc, mechanical galvanized steel, stainless steel, and exterior-coated options. Choose the finish that fits the roof environment. |
The products in this category are practical choices for confirmed roofing and siding applications. Review the product page before using them on any roof assembly that has manufacturer's specifications.
| Product | Best-fit use | Product link |
| #10 pancake screws, zinc-plated, self-drilling bag of 250 | A low-profile screw for steel-to-steel standing seam clip work and metal roofing applications. It uses a square drive and comes in 1-inch or 1-1/2-inch lengths. | #10 pancake screws zinc-plated self-drilling |
| #12 MetalGrip T5 self-drilling roofing and siding fasteners bag of 250 | A steel-to-steel fastener with a #5 self-drilling point, 5/16-inch hex head, mechanical galvanized finish, 15 mm galvanized EPDM washer, or color options. The product page states that the point drills up to .5-inch steel. | #12 MetalGrip T5 self-drilling roofing fasteners |
If you’re comparing these products, contact Supply Maverick with the product name, roof material, substrate, screw length, and a short description of the job. A quick up-front check can save a lot of rework later.
For corrugated PVC roofing screws and plastic roofing screws, panel movement is usually the detail that causes trouble. The same concern applies to polycarbonate roofing screws and washered panel fasteners, and the related thermoplastic panel fasteners need the same care. Plastic sheets expand and contract as temperatures change, and if the fastener is driven too tight, stress can build up around the hole.
Many plastic panel systems use oversized holes, specialty wings, expansion-hole cutters, and other movement-friendly fastener details so the sheet can shift slightly after installation. Guessing here is risky, especially on longer sheets, so follow the panel manufacturer’s instructions for hole size and fastener location.
An EPDM or rubber-style washer helps seal the fastener penetration. The washer should be seated and then left alone, as driving it too far may deform it. The panel may pinch as well, and the seal may fail sooner than expected.
Some plastic roof systems specify where the screw lands on the panel profile. Others require predrilling or a specialty fastener. Before installing corrugated PVC or polycarbonate panels, follow the sheet manufacturer’s instructions and bring in a qualified local installer if the roof design is outside a standard small-project setup.
PVC membrane roofing is its own category. These assemblies can use PVC roof fasteners, plates, discs, induction-welded plates, insulation, membrane, wind-uplift requirements, pull-out values, insulation fasteners, and other components chosen around the deck.
For that reason, TPO PVC roofing screws and plates should be checked against the roof-system specifications. A washered metal roofing screw may be right for a steel-to-steel siding connection. A mechanically attached membrane roof may require approved plates and a tested fastening pattern.
| Application | Fastener needs |
| Corrugated plastic roofing panels | Weather sealing, panel movement allowance, compatible points, and careful washer compression. |
| Greenhouse or porch roof panels | Exterior coating, washer sealing, controlled drive speed, and correct hole sizing. |
| Carports or lean-to roofs | Reliable fastening into wood or metal framing, based on the substrate. |
| Standing seam clip work | A low-profile head that sits flat under the panel. |
| Metal roofing near roof accessories | Self-drilling points, EPDM washers, color choices, and correct head style. |
Supply Maverick is built for buyers who need metal roofing and siding parts without having to dig through a general hardware retailer. Backed by Mid-Michigan Metal Sales, our product knowledge comes from real-world experience with metal building components.
For painted fasteners, color names are generic and may not match every panel manufacturer’s finish. If color matching matters, compare a physical sample before installing fasteners across the entire project.
Need more options? Browse fasteners and metal roofing screws or shop pancake screws for low-profile clip applications. You can also review the shipping policy or contact Supply Maverick with product-specific questions.
The right screw depends on the roof product. Corrugated PVC panels, polycarbonate panels, commercial PVC membrane roofing, metal roofing details, and roof accessories can all have different requirements. Check the substrate, washer style, point, movement allowance, and manufacturer's instructions before ordering.
Sometimes they overlap on specific jobs, but they shouldn’t be treated as interchangeable by default. Plastic panels may need oversized holes or specialty washers; PVC membrane roofs may require approved plates or discs; metal roofing screws are chosen based on the panel, substrate, washer design, coating, drive style, and head style.
Many exposed roofing fasteners use rubber or EPDM-style washers to seal the screw penetration. The right washer or plate depends on the roof material and the system requirements.
Self-drilling screws can work when the fastening application involves compatible steel or metal framing. For plastic panels, it’s important not to overdrive the screw. Follow the panel manufacturer’s guidance for hole size, fastening location, and washer compression.
PVC roof fasteners and plates are commonly used in commercial single-ply membrane roof systems. Plates or discs help distribute load, secure insulation or cover board, and support approved membrane attachment methods.
Screw length depends on the panel profile, washer style, substrate thickness, and required embedment. If you’re unsure, contact Supply Maverick with the product name and project details before ordering.
Eligible roofing screw products may include bulk quantity pricing shown on the product page. Check the product listing for current price breaks, pack counts, and available options.
